top of page
On Going Blog Updates
9-20-24 We have stopped posting repairs for a few years now. It is a bit time consuming and pretty repetitive. 2-23-23 Will post a few...
Austin Patch
Feb 23, 20231 min read
30 views
Roland BN20 Refurb conversion to white
Full BN20 refurb conversion from a KYCMM to KCYMW (basically 5th slot magenta to white). Client wanted to do white. They were warned...
Austin Patch
Jul 21, 20221 min read
41 views
0 comments
Mimaki CJV-150 Orange Channel Dropout
Initial Problem: Client having issues with Orange randomly dropping out. Client would get Orange to come back but then it would drop in...
Austin Patch
Jun 17, 20221 min read
38 views
0 comments
Roland VS-640 Head Replace due to Head Delamination
Client tried to revive head multiple times but i would not fully come back. Looking at the test print it was obvious the head is...
Austin Patch
May 3, 20221 min read
354 views
0 comments
Roland XJ-740 100% nozzle test print loss for Yellow and Black
Initial Problem: Client lost Yellow and Black entirely. They stated this has been an on going issue and happened before. Client not sure...
Austin Patch
Apr 22, 20221 min read
30 views
0 comments
Roland VG-540 Black Head Leaking
Client had issues with the black head dripping. Head #3 in this case. Typically due to a damper failing if they are of the old variety....
Austin Patch
Apr 16, 20221 min read
12 views
0 comments
Mimaki JFX200-2513 Head & Subtank Change
This was a fun one. JFX200 head #1 change, but issues arise. Turns out the Subtank sensor was bad and ink went into the air tubes after I...
Austin Patch
Apr 14, 20221 min read
37 views
0 comments
bottom of page